AutoAir PRODUCT

Standard basecoat colors with excellent coverage.
Use as base for 4300 Series and 4500 Series Sparklescent Colors
to decrease build-up of material allowing for a smoother finish.

Recommended for use with spray guns and large tip-sized airbrushes.

Intermixable translucent basecoat colors.
Transparent Colors work well with small tip-sized airbrushes for fine, detailed artwork.
Also work well for fades and blends over solid base colors.
Use as a toner to other Auto Air Colors to create custom blends.

Bright neon basecoat colors with limited lightfastness.
Not intended for long-lasting exterior finishes.

Use with Discretion!
Apply over 4001 Sealer White for brightest finish. Fluorescent Colors are best applied in very light coats.

Auto Air Iridescent Colors may be used alone for a subtle iridescent effect with some
color shift as light is reflected or use as follows:

Use as a base for 4200 Series Transparent Graphic Colors for custom blends.
Use a base for the 4600 Series Candy Colors.

Auto Air Metallic Colors may be used alone for a metal-like appearance or use as follows:

Metallic Colors are best used over Auto Air Base Coat Sealer Dark
or 4200 Series Deep Black Graphic Colors.
Use as a base for 4200 Series Transparent Graphic Colors for custom metallic blends,
or as base for the 4600 Series Candy Colors.

Pearlized Colors may be used alone for fantastic pearlescent finishes, or use as follows:

Mix with 4200 Series Transparent Graphic Colors for custom pearlescent blends.
Use as a base coat for the 4600 Series Candy Colors.

Auto Air Candy Colors are true candy colors.
Candy Colors are transparent, brilliant colors that allow the underlying coat to interact
with the light passing through the candy color.

Use Candy Colors over 4100 Series Aluminum Bases. Candy Colors may also be used over
Pearlized, Iridescent, Metallic, Cosmic, or Hot Rod Sparkle Colors for candy effects.

4001 Auto Air Sealer White
4002 Auto Air Sealer Dark
Sealer Dark and White – Use as initial layer of Auto Air Colors over prepared surface.
Suitable for use as a replacement of urethane or epoxy sealer except over bare, untreated metal.
May be applied direct to urethane, enamel, lacquer and other finishes after scuffing.

Standard basecoat colors with excellent coverage. Use as base for 4300 Series and
4500 Series Sparklescent Colors to decrease build-up of material allowing for a smoother finish.

Set-Up: Airbrush 0.5mm @ 40 PSI, Spray Gun 1.2mm @ 40 PSI
Thinning: Airbrush: 10- 25% per volume, Spray Gun 10% per volume using 4003, 4010 or 4011 Reducers.
Recommended for use with spray guns and large tip-sized airbrushes.

4003 Auto Air Reducer - Binder Use with smaller sized airbrushes and for operating at reduced pressures.
Reducer is a lower viscosity binder made to thin Auto Air Colors with a lesser volume of binder needed
than thinning with Transparent Base would require.

4004 Auto Air Transparent Base Use as base for mixing with 4600 Series Candy Colors and as mid-coat.
Prior to clearing, use as a filling, mid-coat (inter-coat)over other colors as fill coat over large pigments
and flakes for more even paint film, especially prior to clearing 4500 Series and 4400 Series Colors.

4007 Auto Air Cleaner Highly concentrated biodegradable cleaner used to clean airbrushes.

bottle size pic

4009 Direct to Metal Primer Use for untreated metal substrates as a protective barrier preventing
potential reactions or bleeding between underlying substrate/primer and top-coat colors.
Direct To Metal Sealer has excellent adhesion and corrosion resistance for direct to all metal applications.
Excellent coverage dries quickly and replaces the need for urethane or epoxy sealers.

4010 Flash Reducer - Medium Dry Use to thin colors for improved flow, leveling and spray-ability
with a slight acceleration in drying time. For airbrush usage, 4010 Flash Reducer aids with control and
preventing over-spray when using smaller tip sizes at lower PSI settings for cleaner lines for detailed work.

4011 Flash Reducer - Fast Dry Use to thin colors for improved flow, leveling and spray-ability with
an acceleration in drying time. For airbrush usage, 4011 Flash Reducer aids with control and preventing
over-spray when using smaller tip sizes at lower PSI settings for cleaner lines for detailed work.

colour chart button